A SERVICE OF

logo

Omnia 4.5 Use and Installation Guide – Ver 1.00a
36
36
Network
Opens up a window
to set the Ethernet
communications
protocols (IP
address, default
Gateway and Subnet
Mask info). Make
sure to Save
Changes before
exiting this window.
There are also
options to allow you
to Save Changes to
the network settings,
Reboot Display
(front panel only),
and send a Test
Broadcast packet out
to the connected
network.
Network Submenu
MAC Address
The factory assigned, twelve-digit, hexadecimal hardware address of the Omnia 6 Ethernet interface.
IP Address
The customer assigned TCP/IP address of the Omnia 6 Ethernet interface. See your IT department if you
aren't certain how to configure this parameter.
Gateway
The gateway setting must match your network gateway. See your IT department if you aren't certain how to
configure this parameter.
Subnet Mask
The subnet mask setting must match your network gateway. See your IT department if you aren't certain
how to configure this parameter.