A SERVICE OF

logo

Open as PDF
next previous
Omnia 4.5 Use and Installation Guide – Ver 1.00a
82
82
Where "AT" is the start of the standard modem command string, and;
Where "X0" tells the modem to ignore busy and dial tone detection, and.
Where "x" is the number to dial to reach an outside line (if required), and;
Where "," is a pause, and;
Where "yyy" is the dialing prefix, and;
Where "zzzz" is the dialing suffix.
Note: There are many resources on the World Wide Web pertaining to the possible Hayes command set
options. You can locate such resources by using the search text "Hayes Command Set" in your Internet
browser. Two such sites with resources that have been helpful are:
http://www.modemhelp.net/basicatcommand.shtml
http://www.modemexpress.com/