10
6. Hot Key Operation
6.1. Trigger the OSD Menu
Press <Scroll Lock> twice and then press <Enter>. The OSD main menu will be
displayed on the screen. All of the KVM settings can be configured through the OSD
interface. Some KVM functions can also be performed using the OSD.
<Scroll Lock> + <Scroll Lock> + <Enter>
6.2. Set the Leading Hot Key
A hot key allows you to quickly perform a specific function.
Its leading key is set to <Scroll Lock> by default. You can change this key if needed.
To change the leading hot key, follow this procedure:
Press <CTRL> twice, then the new leading hot key, and finally press <Enter>. The
leading hot key is changed then.
Available leading hot key options include <Scroll Lock>, <Num Lock> and <Caps
Lock>.
Examples:
To set the leading hot key to <Scroll Lock>:
<CTRL> + <CTRL> + <Scroll Lock > + <Enter>
To set the leading hot key to <Num Lock>:
<CTRL> + <CTRL> + <Num Lock> + <Enter>
To set the leading hot key to <Caps Lock>:
<CTRL> + <CTRL> + <Caps Lock> + <Enter>
Tip: You can also change the leading hot key by pressing <F1> in the OSD main menu. See the
section “7.3.5 Hot Key.”
6.3. Channel Selection in a Single-Tier KVM System
6.3.1. Select a Specific Channel
You can select a connected computer by using the hot key combination: first
press <Scroll Lock> twice, then a number (1~16) corresponding to the channel
number of the computer that you want to control, and finally press <Enter>.
