20
Figure 20: Menu position setup
Banner:
Press the arrow keys to move the channel banner until it reaches the desired
position. Then press <ESC> to save the new position.
Figure 21: Channel banner position setup
7.3.5. Hot Key
The default hot key is <Scroll Lock>. You can change the hot key and set it to
<Num Lock> or <Caps Lock> if necessary.
Tip: To change the leading hot key, you must use the hot key combination: <CTRL>
+ <CTRL> + <New leading hot key> + <Enter>, when NOT in the OSD mode. See
the section “6.2 Set the Leading Hot Key.”
7.3.6. Sound
ON: Buzzer is enabled.
OFF: Buzzer is disabled.
Tip: You can also enable/disable the buzzer by using the hot key combination:
<Scroll Lock> + <Scroll Lock> + <B> + <Enter>, when NOT in the OSD mode. See
the section “6.5 Disable or Enable the Buzzer.”
7.3.7. Language
3 languages are available for showing the OSD menus, including English (En),
Deutsch (De), and Francais (F).
