37
11.3. Remote Access to an EZswitch Channel
After properly configuring Dominion KX II, you can remotely access any computer
connected to the EZswitch KVM switch via Dominion KX II.
A. Launch the web browser, and type the IP address for Dominion KX II.
B. The login page opens. Type a valid user name and password, and click Login.
Figure 45: Login page
C. The Port Access page opens. If not, click the Port Access tab.
D. Click the name of the port where EZswitch is connected. All channels (targets)
of the EZswitch KVM switch are displayed.
Figure 46: Channel ports of EZswitch
E. Click the desired channel.
F. Click Connect. A Virtual KVM Client window opens to the selected EZswitch
channel.
Figure 47: Connection to an EZswitch channel
For detailed information on Dominion KX II, see the Dominion KX II User Guide,
which can be downloaded from the Firmware and Documentation section of
Raritan's website (http://www.raritan.com/support/firmware-and-documentation/).
