Facsimile User Tools
88
5
Initial Setup TX
When you turn on the machine or re-
turn to Copy mode, the machine re-
turns to the home settings. You can
change these home settings so that
the machine starts with your most fre-
quently used features selected.
This procedure can be used to change
the home settings for the transmis-
sion mode (Memory/Immediate
Transmission) and scan settings (Res-
olution, Photo Original(Original
Type), Auto Image Density, and Fax
Auto Reset).
Note
❒ You can also choose whether the
machine returns to the home set-
tings after each communication. ⇒
P.130 “Changing the User Parame-
ters”(Switch01, Bit7)
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {Facsimile}
key.
B
Press the {
{{
{User Tools}
}}
} key.
C
Enter the function number for
“Initial Setup TX” with the
number keys.
The “Initial Setup TX” menu is
shown on the display.
Note
❒ If “Initial Setup TX” is not
shown, press [↑
↑↑
↑Prev.] or [↓
↓↓
↓Next].
D
Enter the function number of the
mode whose home setting you
wish to change.
Note
❒ If you make a mistake, press
[Cancel] and enter the correct
number.
E
Select the home setting with the
<
<<
< or >
>>
> key then press [OK].
❖
❖❖
❖ Transmission Mode
Us28-1.tif
Adjustment
User Tools
Program
Energy Saver
Clear Modes
Interrupt
Screen Contrast
LTWO120E.eps
Us137-2.tif
Us165-1.tif
Us165-2.tif
