Facsimile User Tools
84
5
C
Enter the function number for
“Register/Delete” with the
number keys.
D
Enter the function number for
“Reg. Irreg. Area” with the
number keys.
Note
❒ If “Reg. Irreg. Area” is not
shown, press [↑
↑↑
↑Prev.] or [↓
↓↓
↓Next].
E
Press [Area 1] or [Area 2].
Note
❒ If a size is already registered, it
is shown on the display.
F
Press [Vert.].
G
Select a size you wish to register
using the <
<<
< or >
>>
> key and press
[OK].
The specified size is shown on the
display.
Note
❒ When you select “Auto”, “---” is
shown on the display.
H
Press [Horiz.].
I
Enter the length with the number
keys and press [OK].
The specified size is shown on the
display.
Note
❒ Each time you press [mm ↔
↔↔
↔
inch], the units change between
“inch” and “mm” alternately. If
you enter a length and change
the unit by pressing [mm ↔
↔↔
↔
inch], the length is converted au-
tomatically according to the
unit (fractions are rounded off).
For example, when you enter
{2}, {5}, and {0} in millimeters
and change to “inch”, the length
“9.8inch” is shown on the dis-
play. If you press [mm ↔
↔↔
↔ inch]
again, “249mm” is displayed.
Us137-2.tif
Us161-1.tif
Us161-2.tif
Us161-3.tif
Gbfax-014.tif
Gbfax-015.tif
Gbfax-016.tif
