Register/Delete Menu
83
5
C
Enter the function number for “Re-
ports/Lists” with the number keys.
D
Enter the function number for
"Auto Doc. orig." with the
number keys.
Note
❒ If “Reg. Auto Doc.” is not
shown, press [↑
↑↑
↑Prev.] or [↓
↓↓
↓Next].
E
Enter the number of the Auto
Document you wish to print out
with the number keys.
F
Press the {
{{
{Start}
}}
} key.
When printing is completed, the
display shown in step D appears
again.
Note
❒ If you press [Cancel] before
printing starts, the printing
stops and the display shown in
step D appears again.
G
Press the {
{{
{User Tools}
}}
} key.
Registering an Irregular Area
When you select Irregular Area to
scan a non-standard size original, two
custom sizes of original are available
(Area 1 and Area 2). Use this function
to register these custom sizes in ad-
vance.
To change an existing Irregular Scan
size, just use the following procedure
to overwrite it.
Important
❒ When registering or changing an
original size, we recommend that
you make a memo of the new size.
Limitation
❒ For the vertical length (width),
select “Auto”, “8
1
/
2
inch”,
“11inch”, “8.3inch (A4L)”,
“10.1inch(B4L)”or “11.7inch(A3L)”.
❒ For the horizontal length, specify
from 128 to 432mm or from 5
1
/
2
to
17 inches.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {Facsimile}
key.
B
Press the {
{{
{User Tools}
}}
} key.
Us137-2.tif
L2fxex172.tif
L2fxex173.tif
L2fxex174.tif
Us102-1.tif
Adjustment
User Tools
Program
Energy Saver
Clear Modes
Interrupt
Screen Contrast
LTWO120E.eps
