MICROPHONE HEAD ME 20
Omnidirectional pressure-transducer. May be used when acoustical
feedback is not likely to occur and in rooms with little or no reverber-
ation. The omnidirectional sensitivity may on the other hand ad-
vantageously be used to pick up any acoustical environment to
make the recording livelier and more interesting.
Frequency response
Standard frequency response MKE 203
20
Frequency response. .....
Acoustical mode of operation
Directional characteristic
Sensitivity at 1000 Hz
Output impedance .. .
Minimum load impedance
Recommended load
impedance
Bass attenuator .
S/N to DIN 45590
Connector . ..
Pin connections
Cable connector
Powersupply
50... 15000 Hz
pressure transducer
omnidirectional
0.3 mV/"bar ,G;3 mV/Pa
:t 2.5dB
appx. 200!1
300!1 (switchposition I)
50 .. 15000 Hz
pressuretransducer
omnidirectional
0.3 mV/"bar,G; 3 mV/Pa
:t 2.5 dB
appx.200!1
300!1 (switchpositionI)
>5kf1 >5k!1
(switch positions 11and111) (switchpositions 11and 111)
see "Technical Description K 3 N"
appx. 64 dB appx.64dB
3-pin, DIN41524 3-pin CannonXLR-3
1-. audio,2-. housing/ 1-. housing/ground,
ground, 3-.audioto 2 -.audio,
DIN 45594 3-.audio
3-pin, DIN41524 3-pin Cannon
(e.g. T3261001) (e.g. XLR-3-11 C)
5.6 Vbatterypowering 5.6V batterypowering
or phantompoweringto or phantompoweringto
DIN 45596 tor DIN45596 for
12 48V, 12 .48V,
morethan 600hours
19/220 x 186
appx. 160 9
Satin nickel
morethan600 hours
19/220 x201
appx. 1709
Satinnickel
We reserve the right to alterspecifications, especiallywith regardto technical
improvements.
21
- -
- ---
-
-
110dB
- - -
-- -
- -- -
--
--
f-
-
