MICROPHONE HEAD ME 40
Supercardioid directional pattern. This-head has multiple applicat-
ions: to be used in acoustically poor rooms to suppress reverber-
ant sound pickup and to avoid feedback from loudspeakers.
Effectively cuts out environmental noise. All sounds reaching the
microphone from the rear are effectively attenuated.
90' 90'
180' 180'
_'000H,
4000H,
_500H,
n- 2000H,
. 8000H,
Frequency Response
22
Standard frequency response MKE 403
1
\
1
\
Frequency response. .....
Acoustical mode 01operation
Directional characteristic
Sensitivity at 1000 Hz
Output impedance .. ..
Minimum load impedance
Recommended load
impedance
Bass attenuator ...
S/N to DIN45590
Connector ....
Pinconnections
Cable connector
Power suppiy
Battery operatingtime
Dimensions in mm
Weight
Finish
50.. .15 000Hz
pressure gradient
transducer
super cardioid
0.3 mV/lLbar,f>3 mV/Pa
:t 2.5 dB
appx. 200 n
300 n(switch positionI)
50. . . 15000 Hz
pressure gradient
transducer
super cardioid
0.3 mV/ILbar ,f> 3 mV/Pa
:t 2.5 dB
appx. 200 n
300 n (switch.positionI)
>5kfi >5kfi
(switchpositions11and 111). (switchpositions11and 111)
see "Technical DescriptionK3 N"
appx.64 dB appx.64 dB
3-pin, DIN 41524 3-pin CannonXLR-3
1-->audio,2 -->housing/ 1-->housing/ground,
ground, 3 -->audioto 2-->aUdio,3-->audio
DIN45594
3-pin, DIN41524
(e.g. T3261001)
5.6 Vbatterypowering
or phantompoweringto
DIN 45596 lor
12. 48V,
more than600hours
19/220 x 186
appx. 1609
Satin nickel
3-pin Cannon
(e.g. XLR-3-11 C)
5.6V batterypowering
or phantompoweringto
DIN45596 for
12. .48 V,
morethan600 hours
19/220 x 201
appx. 1709
Satinnickel
We reserve the right to alterspecifications, especiallywith regard to technical
improvements.
23
J
-
110dB
-
n- -- - - - -- -- ---
-
.-
- ---
n - - --n-
--
--
-
.-
