25
INFO
Displays the current status of the projector and information
concerning the projected video/graphic signal.
This function is displayed on pressing the key on the remote
control (or, in the absence of the On Screen Display, the ▶ key
on the keypad).
QUICK MENUS
The quick menus provide access to the main adjustments that
affect image quality without calling the main menu.
BRIGHTNESS
,
CONTRAST, COLOUR, TINT, SHARPNESS
and
FILTER
adjustments appear at
the bottom of the screen one after the other when the ▼ and
▲ keys are pressed.
MESSAGES
The following messages could appear on your screen:
No Signal
The system does not recognise any signal applied to the se-
lected input. In this case:
•
Make sure the selected input is connected to a video
or graphic signal and that that source is functioning cor-
rectly.
•
Check the condition of the cables used to connect the
system to the various sources.
•
Make sure the video or graphic signals supplied by the
source are compatible with the system’s technical spe-
cifications and, in particular, with those of the selected
input.
Out of range
This message appears when either the resolution or the ver-
tical/horizontal frequency of the input signal exceeds system
specifications (when an input is supplied with an incompatible
signal (e.g. after setting the components input to YPrPb 15kHz
a progressive signal is connected).
