A SERVICE OF

logo

11
Operation
Computer Keyboard/Mouse Reset
Intheeventthatthekeyboardandmousearenotoperatingcorrectly,aresetmaybeneeded.ToperformaUSBkeyboard/
mouseresetonthecurrentlyselectedcomputer,dothefollowing:
1. Activate Hotkey Setting Mode using the aforementioned command.
2. Press and release the [F5] key.
After pressing the [F5]key,youwillautomaticallyexitHotkey Setting Mode and a keyboard/mouse reset will be performed. If
youarestillunabletoregainaccesstoyourkeyboardandmouse,youmayneedtorestarttheaffectedcomputerorperforma
system reset.
Turning Beeper ON/OFF
ThebeepersoundthatoccurswhenperformingahotkeycommandorwhenswitchingportscanbetoggledON/OFFviathe
OSD(seetheActivateBeepersettingintheF3:SETmenusectiononpage15);or,byperformingthecommandbelow.
1. Activate Hotkey Setting Mode using the aforementioned command.
2. Press and release the [B] key.
After pressing the [B] key,textwillbedisplayedstatingthebeeperhasbeenturnedONorOFF,andHotkey Setting Mode will
beexited.
Setting the Port Operating System (Administrator Only)
Theport’soperatingsystemsettingcanbechangedtomatchthatoftheconnectedcomputerviatheOSD(seetheSet
OperatingSystemsettingintheF4:ADMmenusectiononpage16);or,byperformingthecommandbelow.
1. Activate Hotkey Setting Mode using the aforementioned command.
2. Press and release the [F1], [F2] or [F3] key. [F1]setstheoperatingsystemtoWindows,[F2] toMacand[F3] to Sun.
Afterpressingthedesiredfunctionkey,theportoperatingsystemischangedandHotkey Setting Mode exited.
Restore the OSD Default Values (Administrator Only)
RestoringtheOSDdefaultvalueswillerasechangesandrestorethedefaultvaluesforallOSDsettingsexceptusernames,
passwordsandportnames.TheOSDdefaultvaluescanberestoredviatheOSD(seetheRestoreDefaultValuessettinginthe
F4:ADMmenusectiononpage16);or,byperformingthecommandbelow.
1. Activate Hotkey Setting Mode using the aforementioned command.
2. Press and release the [R] key.
3. Press the [Enter] key.
After pressing the [Enter]key,textwillbedisplayedstatingthedefaultsettingshavebeenrestored,andHotkey Setting Mode
willbeexited.