A SERVICE OF

logo

21
Firmware Upgrade
SIU Firmware Upgrade Recovery
1. UnplugtheSIUfromthecomputeritisconnectedto.
2. SlidethermwareupgraderecoveryswitchtotheRecover position.
3. PlugtheSIUbackintothecomputer.
4. ConnecttheincludedrmwareupgradecablefromtheRJ11rmwareupgradeportonthefrontoftheswitchtoaDB9
Serialportonthecomputeryousavedthermwareto.
5. Invoke Firmware Upgrade ModeviatheFirmwareUpgradesettingorAdapterUpgradesettingintheF4:ADMmenu(See
page17fordetails).Note: The Firmware Upgrade setting allows you to upgrade both the KVM firmware and SIU firmware.
The Adapter Upgrade setting only allows you to upgrade the SIU firmware.
6. Proceedwiththermwareupgradestartingwithstep4intheFirmwareUpgradeUtilitysection.(Seepage19fordetails.)
7. WhentheupgradeiscompleteandtheKVMresetsitself,unplugtheSIUfromthecomputeritisconnectedto.
8. SlidethermwareupgraderecoveryswitchtotheNormalposition,andplugtheSIUbackintothecomputer.