ZyWALL 2 User’s Guide
33-10 Firmware and Configuration File Maintenance
Step 1. Display menu 24.6 and enter “y” at the following screen.
Figure 33-9 System Maintenance: Restore Configuration
Step 2. The following screen indicates that the Xmodem download has started.
Figure 33-10 System Maintenance: Starting Xmodem Download Screen
Step 3. Run the HyperTerminal program by clicking Transfer, then Send File as shown in the
following screen.
Figure 33-11 Restore Configuration Example
Step 4. After a successful restoration you will see the following screen. Press any key to restart the
ZyWALL and return to the SMT menu.
Figure 33-12 Successful Restoration Confirmation Screen
Type the configuration file’s
location, or click Browse to search
for it.
Choose the Xmodem protocol.
Then click Send.
Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):
Starting XMODEM download (CRC mode) ...
CCCCCCCCC
Save to ROM
Hit any key to start system reboot.
