Filter
Top Products
A
BOUT
T
HIS
G
UIDE
This chapter covers security issues over the network, assigning rights and
permissions to users.
If release notes are shipped with your product and the information there differs
from the information in this guide, follow the instructions in the release notes.
Most user guides and release notes are available in Adobe Acrobat Reader
Portable Document Format (PDF) or HTML on the 3Com World Wide Web site:
http://totalservice.3com.com/
Conventions Table 1 and Table 2 list conventions that are used throughout this guide.
Table 1 Notice Icons
Icon Notice Type Description
Information note Information that describes important features or
instructions
Caution Information that alerts you to potential loss of data or
potential damage to an application, system, or device
Convention Description
Screen displays This typeface represents information as it appears on the
screen.
Syntax The word syntax means that you must evaluate the syntax
provided and then supply the appropriate values for the
placeholders that appear in angle brackets. Example:
To enable RIPIP, use the following syntax:
SETDefault !<port> -RIPIP CONTrol =
Listen
In this example, you must supply a port number for <port>.
Commands The word command means that you must enter the
command exactly as shown and then press Return or Enter.
Commands appear in bold. Example:
To remove the IP address, enter the following command:
SETDefault !0 -IP NETaddr = 0.0.0.0
The words enter
and type
When you see the word enter in this guide, you must type
something, and then press Return or Enter. Do not press
Return or Enter when an instruction simply says type.