Filter
Top Products
2
I
NSTALLATION
This chapter describes the SuperStack II UPS Management Module
and how to install the module in the SuperStack II UPS.
The SuperStack II UPS Management Module
The Management Module is a single box that connects to the
SuperStack II UPS directly through the management power
connector.
The Management Module is available in two different models:
Ethernet (3C16020) and Token Ring (3C16021). The Ethernet
model can connect to a twisted-pair Ethernet (10base-T) network
using an RJ-45 connector. With the Token-Ring model, you can
connect the Management Module to a shielded or unshielded
twisted-pair Token Ring at 4 Mbps or 16 Mbps.
The module contains a full SNMP agent that implements the
Internet standard (RFC-1628) UPS Management Information Base,
private extensions for more control, and relevant portions of MIB II.
WARNING: The RJ-45 connector is a data socket. Only data cables
should be connected to it. Do not connect telephone outlets to
these connectors.
AVERTISSEMENT: Le connecteur RJ-45 est une prise de données.
Seuls des âbles de données devraient y être connectés. Ne reliez
pas de prises téléphoniques à ces connecteurs.
WARNUNG: Bei dem Anschluß RJ-45 handelt es sich um eine
Datenbuchse, an die ausschließlich Datenleitungen angeschlossen