3Com 3C16021 Power Supply User Manual


 
DUA1602-0AAA01
3-10
C
HAPTER
3: C
ONFIGURING
T
HE
M
ANAGEMENT
M
ODULE
Host Table Setup Screen
The Host Table Setup screen allows you to add hosts permanently
to the Management Module’s Host Table. The host table
automatically adds hosts as nonpermanent entries when host
communication is established with the Management Module. This
command must be used if you want to receive traps.
To access this screen from the Main Configuration screen, type
HS
and press [Return]. The Host Table Setup screen appears (Figure
3-3).
Figure 3-3
Host Table Setup Screen
The Host Table Setup screen displays the host access list and the
current setting for each host. The host number (Host Num) appears
in the left column of the screen.
To change a value of a host field, type the two letter command for
a specific host number. For example, to change the IP address,
type:
HI n a.b.c.d
where n equals the host number and a, b, c,
and d are numbers between 0 and 255.
You can change the following settings in the Host Table Setup
screen: