Filter
Top Products
3-82
Item Description
TFTP Server IP Address
Specifies the TFTP Server IP Address from which the image files
are downloaded.
Source File Name
Specifies file name for the downloaded image file. Click Browse to
locate the image file on your computer.
Activating Image Files
The Active Image Page allows network managers to select and reset the Image files.
Click Administration > Firmware Upgrade > Active Image. The Active Image Page opens.
Figure 3-92 Active Image Page
The Active Image Page contains the following fields:
Table 3-71 Active Image Page item description
Item Description
Active Image After Reset
Selects the image file to be active on the unit after the switch is
reset. The possible field values are:
z Current Image: Activates the current image after the switch is
reset.
z Backup Image: Activates backup image after the switch is
reset.
Managing System Logs
This section provides information for managing system logs. The system logs enable viewing switch
events in real time, and recording the events for later usage. System Logs record and manage events
and report errors and informational messages. Event messages have a unique format, as per the
system Log protocols recommended message format for all error reporting. For example, system Log
and local device reporting messages are assigned a severity code, and include a message mnemonic,
which identifies the source application generating the message. It allows messages to be filtered based
on their urgency or relevancy. Each message severity determines the set of event logging devices that
are sent per each event message.
The following table lists the log severity levels: