Filter
Top Products
3-86
Table 3-75 Port Mirroring Setup Page item description
Item Description
Select port type
Defines the monitor port (destination port) or mirror port (source
port). The possible values are:
z Monitor: Defines the port as the monitor port.
z Mirror: Defines the port as the mirrored port to be monitored
and indicates the traffic direction to be monitored. If selected,
the possible values are: Mirror In (Enables port mirroring on the
port RX), Mirror Out (Enables port mirroring on the port TX).
Removing Port Mirroring
The Port Mirroring Remove Page permits the network manager to terminate port mirroring or
monitoring.
Click Monitoring > Port Mirroring > Remove. The Port Mirroring Remove Page opens.
Figure 3-96 Port Mirroring Remove Page
Configuring Cable Diagnostics
The switch provides cable diagnostic, which helps you detect and resolve issues with the attached
cables.
This section contains the following topics:
z Configuring Cable Diagnostics
z Viewing Cable Diagnostics
Configuring Cable Diagnostics
The Cable Diagnostics Page permits the network manager to perform tests for individual port.
Click Monitoring > Cable Diagnostics > Diagnostics. The Diagnostics Page opens.