Filter
Top Products
3-44
Item Description
Source IP Address Matches the source IP address to which packets are addressed to the ACL.
Source Mask Indicates the source IP address mask.
Destination IP
Address
Matches the destination IP address to which packets are addressed to the
ACL.
Destination Mask Indicates the destination IP address mask.
DSCP
Matches the packet DSCP value to the ACL. Either the DSCP value or the IP
Precedence value is used to match packets to ACLs.
IP Precedence Indicates matching ip-precedence with the packet IP precedence value.
Action
Indicates the ACL forwarding action. In addition, the port can be shut down, a
trap can be sent to the network administrator, or packet is assigned rate
limiting restrictions for forwarding.
Configuring ACL Binding
This section includes the following topics:
z Defining ACL Binding
z Removing ACL Binding
z Viewing ACL Binding
Defining ACL Binding
The ACL Binding Setup Page allows the network administrator to bind specific ports to MAC or IP based
ACLs.
Click Device > ACL > ACL Binding > Setup. The ACL Binding Setup Page opens.
Figure 3-46 ACL Binding Setup Page
The ACL Binding Setup Page contains the following fields:
Table 3-35 ACL Binding Setup Page item description
Item Description
Bind ACL Assigns ACL type
Select ACL
Selects the ACL from a list of previously defined ACLs to which the port can
be bound.