Filter
Top Products
3-4
Table 3-3 System Access Summary Page item description
Item Description
User Name Displays the user name.
Access Level Displays the user access level.
Configuring IP and MAC Address Information
This section contains information for defining IP interfaces, and includes the following sections:
z Defining IP Address
z Configuring ARP Settings
z Configuring MAC Address Table
Defining IP Address
To enable the other devices on the network to communicate with the switch, you need to assign an IP
address to it: either by DHCP or by assigning a static IP address.
Click Administration > IP Setup. The IP Setup Page opens.
Figure 3-5 IP Setup Page
The IP Setup Page contains the following fields:
Table 3-4 IP Setup Page item description
Item Description
Configuration Method
Defines whether the IP address is configured statically or dynamically. The
possible field values are:
z Static: Specifies that the IP address is configured by the user.
z DHCP: Specifies that the IP address is dynamically obtained by DHCP
Server.
IP Address
Defines the IP address. The default value is 169.254.xxx.xxx. If the MAC
address is 08004E000102, the IP address would be 169.254.1.2.
Subnet Mask Defines the subnet mask. The default value is 255.255.0.0.
Gateway Defines the gateway address. The default value is blank.