Filter
Top Products
User Guide
4
1 NJ95 Main Unit Allow up to four devices to be connected to the
network.
2a Universal Wall
Plate
(Included)
Used to mount the main unit – pass through “wall
plate” and non manufacturer-specific.
2b Manufacturer-
Specific Wall Plate
(purchased
separately – For
available plates see
www.3Com.com/
products and
Appendix E)
Used to Mount the Main Unit – Mount the
specific connectors on the Wall Plate. One of the
connectors would serve to connect the switched
ports to the Network.
The second connector referred to as an optional
port bypasses the functionality of the switch.
Allows connection to a separate network segment
or to an analog or digital PBX telephone network
3 LEDs Indicates network connection status.
Indicates NJ95 power status.
4 Power Socket NJ95 can be powered from a local power supply
(available for purchase from 3Com); required if
your network does not support Power Over
Ethernet (PoE).
davinci_gde.book Page 4 Thursday, December 26, 2002 4:52 PM