Filter
Top Products
3. Installing the NJ95 Network Jack
9
2a. Mount the NJ95 Main unit on the Universal or
Manufacturer-specific wall plate.
Figure 5: Rear view of NJ95
1 Ethernet Uplink port Connects the NJ95 to the network.
Make sure the port on the network switch to
which the NJ95 is connected is configured as a
standard MDI port.
2 Screw Tab Guide Used to align and retain the Main unit to the Wall
Plate
3 Main Latch Used to retain the Main unit to the Wall Plate
4 Alignment Tabs Used to align the Main unit to the Wall plate
davinci_gde.book Page 9 Thursday, December 26, 2002 4:52 PM