Filter
Top Products
User Guide
14
3. Set up the power supply
Selecting the power scheme and installing it:
See Appendix C: Setting up the Power Supply (p 23).
You can verify the NJ95 Network Jack Installation by checking
the LEDs.
LED Description
(LAN)
■
On—The NJ95 is connected to the network and a
link has been established.
■
Off—There is no connection to the network.
(Power)
■
On—The NJ95 is receiving power (local or via the
network).
■
Off—The NJ95 is not receiving power.
CAUTION:
Make sure the port on the wiring closet
switch to which the NJ95 is connected is configured as a
standard MDI port.
davinci_gde.book Page 14 Thursday, December 26, 2002 4:52 PM