Filter
Top Products
6
E
THER
L
INK
S
ERVER
10/100 PCI NIC Q
UICK
S
TART
G
UIDE
using installation diskettes. For more information about
installation diskettes, see
the next section.
To make a DOS-bootable diskette:
1 Insert a blank, formatted diskette in drive A.
2 At the DOS prompt, enter:
sys a:
System files are copied to the diskette.
3 Remove the diskette from drive A and attach a label
for future reference.
Repeats steps 1-3 to create a second DOS-bootable
diskette. Label the diskettes
EtherDisk 1
and
EtherDisk 2
.
Creating Installation Diskettes
To create installation diskettes from the
EtherCD
:
1 Turn on the power to the PC and start Windows.
2 Insert the
EtherCD
in the CD-ROM drive.
The
EtherCD
Welcome screen appears.
3Click
NIC Software
.
4Click
NIC Drivers and Diagnostics
.
5Click
Installation Utilities
.
6Click
Create Installation Diskettes.
The
EtherCD
Diskette Creation Utility Welcome
screen appears.
7Click
Next
.
8 Insert the blank, formatted diskette labeled
EtherDisk 1
in the PC, and then click
Next
.
Files are copied.
EtherDisk 1
contains:
■
NDIS 2/3/4/5 drivers
■
DOS utilities
■
Windows 2000 Utilities to enable disable task
offloads
■
README.TXT file
9 Remove the disk and insert the disk labeled
EtherDisk 2
when prompted, and then click
OK
.