Filter
Top Products
Installing and Operating the Module 3 - 3
Unpacking Procedures
When unpacking your 10BASE-FB Module:
1. Verify that the 10BASE-FB Module is the correct model by matching
the model number listed on the side of the shipping carton to the
model number you ordered (Model Numbers 5102M-FBP, 5104M-FBP,
or 5104M-FB1).
Note that the product model number printed on the shipping box
differs from the model number on the product. The model number
on the shipping box contains the prefix ’3C9’.
2. Remove the module from the shipping carton.
3. Remove the module from the anti-static shielding bag and inspect it
for damage. If the module appears to be damaged, replace it in the
anti-static shielding bag, return it to the shipping carton, and contact
your local supplier.
4. Keep the shipping carton and anti-static shielding bag in which your
module was shipped for repackaging the module for storage or
shipment.
5. Record the serial number of your 10BASE-FB Module. A log for this
and other information specific to your modules is included in the
ONline SystemConcentrator Installation and Operation Guide,
Appendix B, Slot Usage Chart.