Filter
Top Products
CLI Commands B-25
number_retries <number>
timeout <seconds>
Sets the global parameters for DNS; both the local DNS hosts (list DNS host) and
the remote DNS servers (list DNS servers).
set facility
<facility_name>
loglevel [level]
Sets the severity reporting level for a facility. The hosts that will receive the error
log entries are defined using add syslog loglevel. Use list facilities to see what the
current loglevel is for each facility. The levels:
CRITICAL - a serious system error, which may effect system integrity
UNUSUAL - an abnormal event, which the system should recover from
COMMON - a regularly occurring event that is not frequent
VERBOSE - a regular periodic event, e.g. a routing update message
DEBUG - for debugging purposes only
set ilmi vpi <number>
vci <number>
This allows modification of the Virtual Path or Channel ID that will be used for
exchanging ILMI (Integrated Local Management Interface) messages.
set interface
<interface_name>
filter_access [ON | OFF]
input_filter <filter_name>
output_filter <filter_name>
Sets filter parameters for the specified protocol on the specified interface. You can
see the available filter files using list filters, view the contents of a filter file using
show filter, and add filter files to FLASH memory using TFTP.
Parameters Description
cache_size Enter the size of the cache. The valid range is from 20-500.
number_retries Number of times the resolve name request will be sent to each Name Server
if the server fails to respond to a request before the timeout period. Default
is 1, valid range is 1-5.
timeout Number of seconds to wait before deciding a request to a Name Server has
timed out. Minimum interval and default is 5 seconds, maximum interval is
120 seconds .
Parameters Description
vpi The virtual path identifier for the ILMI.
vci The virtual channel identifier for the ILMI.
Parameters Description
<interface_name> Designation of interface you are setting parameters for. Limit of 32
characters.
filter_access ON causes filters specified for an interface with a set interface command,
to override filters specified with a set user command, when the filters are
of the same type.
input_filter Name of filter file you wish to be applied to the input stream coming in on
the specified interface. Limit: 20 characters.
output_filter Name of the filter file you wish to be applied to the output stream leaving
the specified interface. Limit: 20 characters.