Filter
Top Products
5
QUICK VC SETUP
This chapter will describe in detail the operations of the OfficeConnect Remote
812 VC Setup Wizard program. It will identify the required information, steps
involved, and sample output scripts from the execution of this program.
CLI QuickVC Setup
Script
Introduction The CLI QuickVC Setup program allows you to quickly configure remote site
profiles (virtual channel connections) for your OfficeConnect Remote 812. Instead
of using cryptic commands you will simply respond to a series of questions
regarding different aspects of your configuration. The program will convert your
responses into the appropriate CLI commands and execute them.
The OfficeConnect Remote 812 can be configured as an ATM device. Depending
on the present configuration, the QuickVc script will prompt you for the
appropriate parameters.
Instructions This section contains the CLI QuickVC Setup script for all possible OfficeConnect
Remote 812 Virtual Channel (VC) configurations. You will be required to enter
information concerning network configurations. Questions in the CLI QuickVC
Setup script are presented here in tables.
Write the appropriate information for your desired configuration in the following
tables.
Starting QuickVC Setup
OCR-DSL> quickvc
Welcome to the OfficeConnect Remote 812 VC Setup Wizard
The VC Setup Wizard allows you to add and configure a VC profile on your
OfficeConnect Remote 812. Each profile must have a unique name.
ATM Parameters The characteristics of the ATM Virtual Circuit must be configured.
Question Default Your System
What is the name to be added? [ ]
Question Default Your System
Enter the Virtual Path Identifier [0]
Enter the Virtual Channel Identifier [0]
Is the Category of Service (U)br, (V)br or (C)br? [U]