Filter
Top Products
50 CHAPTER 3: CONFIGURING WIRELESS SERVICES
Configure
Employee Access
Services
Services for Employee access are typically configured to provide secure,
encrypted access to the wireless network.
The following sections provide information about how to configure
Employee access:
“Task Table” on page 50
“Step Summary” on page 52
“Example: Configure Employee Access” on page 53
Table 9 on page 50 contains the tasks you need to perform to configure
Employee access services. The summary provides the configurable options
you should set. The section “Example: Configure Employee Access” on
page 53 guides you through the primary wizards and pages in 3WXM to
configure Employee access services.
Task Ta ble Table 9 contains the tasks you need to perform to create a service for
employee access. For a summary of configurable items, see “Step
Summary” on page 52. For detailed steps about how to perform each of
these tasks, see “Example: Configure Employee Access” on page 53.
Table 9 Creating a Service for Employee Access
Task Path
Primary Parameters to
Configure
“Create a
Radio Profile”
on page 54
1 Tool bar option: select
Configuration.
2 Organizer panel: expand
the WX switch.
3 Expand Wireless.
4 Click on Radio Profiles.
5 Select Radio Profile in the
task list.
From the Create Radio Profile
wizard:
Radio profile name: enter a
name
After you create the service profile,
you can map it to the radio profile.
After you install the MAPs, you can
map their radios to the radio
profile.
Note: The examples in this chapter
configure the radio profile first.
However, you also can configure
the radio profile later as part of
service profile configuration.