Filter
Top Products
1-6
Type field value Attribute type Type field value Attribute type
8 Framed-IP-Address 30 Called-Station-Id
9 Framed-IP-Netmask 31 Calling-Station-Id
10 Framed-Routing 32 NAS-Identifier
11 Filter-ID 33 Proxy-State
12 Framed-MTU 34 Login-LAT-Service
13 Framed-Compression 35 Login-LAT-Node
14 Login-IP-Host 36 Login-LAT-Group
15 Login-Service 37 Framed-AppleTalk-Link
16 Login-TCP-Port 38 Framed-AppleTalk-Network
17 (unassigned) 39 Framed-AppleTalk-Zone
18 Reply-Message 40-59 (reserved for accounting)
19 Callback-Number 60 CHAP-Challenge
20 Callback-ID 61 NAS-Port-Type
21 (unassigned) 62 Port-Limit
22 Framed-Route 63 Login-LAT-Port
The RADIUS protocol has good scalability. Attribute 26 (Vender-Specific) defined in this protocol allows
a device vendor to extend RADIUS to implement functions that are not defined in standard RADIUS.
Figure 1-4 depicts the format of attribute 26. The Vendor-ID field used to identify a vendor occupies four
bytes, where the first byte is 0, and the other three bytes are defined in RFC 1700. Here, the vendor can
encapsulate multiple customized sub-attributes (containing vendor-specific Type, Length and Value) to
implement a RADIUS extension.
Figure 1-4 Vendor-specific attribute format
Type
……
Length
0
7
Vendor-ID
715 31
Vendor-ID Type (specified) Length (specified)
Specified attribute value……
Introduction to HWTACACS
What is HWTACACS
Huawei Terminal Access Controller Access Control System (HWTACACS) is an enhanced security
protocol based on TACACS (RFC 1492). Similar to the RADIUS protocol, it implements AAA for
different types of users (such as PPP, VPDN, and terminal users) through communicating with TACACS
server in client-server mode.