3Com WX3000 Switch User Manual


 
1-16
To do… Use the command… Remarks
Configure the probe timeout
time
timeout time
Optional
By default, a probe times out in
three seconds.
Configure the type of service
tos value
Optional
By default, the service type is
zero.
Configure the domain name to
be resolved
dns resolve-targetdomai
domainname
Required
By default, the domain name to
be resolved by DNS is not
specified.
Configure the IP address of the
DNS server
dns-server ip-address
Required
By default, no DNS server
address is configured.
Start the test
test-enable
Required
Display test results
display hwping results
[ admin-name operation-tag ]
Required
The display command can be
executed in any view.
Configuring HWPing client to send Trap messages
Trap messages are generated regardless of whether the HWPing test succeeds or fails. You can
specify whether to output Trap messages by enabling/disabling Trap sending.
Follow these steps to configure the HWPing client to send Trap messages:
To do… Use the command… Remarks
Enter system view
system-view
Enable the HWPing client
function
hwping-agent enable
Required
By default, the HWPing client
function is disabled.
Create a HWPing test group
and enter its view
hwping administrator-name
operation- tag
Required
By default, no test group is
configured.
Enable the HWPing client to
send Trap messages
send-trap { all | { probefailure
| testcomplete | testfailure }* }
Required
By default, Trap sending is
disabled.
Configure the number of
consecutive unsuccessful
HWPing tests before Trap
output
test-failtimes times
Optional
By default, Trap messages are
sent each time a test fails.
Configure the number of
consecutive unsuccessful
HWPing probes before Trap
output
probe-failtimes times
Optional
By default, Trap messages are
sent each time a probe fails.