12 78-9000-0120-3-A
The • “Blank” Marker column displays;
− (check mark) if there is not any previously written data present in the iD-Markers.
− (warning symbol with a magnifying glass) if previously written data is present in the iD-Markers.
Clicking the magnifying glass opens a new dialog box (shown below) which displays the previously written •
template data.
The • Signal Level column displays the signal level at which the iD-Marker was read.
The • Data Errors column displays;
A − icon is displayed when no reading errors have occurred.
An − icon is displayed if a read error has occurred.
Either perform the • Read Only process again, or
Remove and replace the iD-Marker(s) that indicate an error.•
The • Lock column indicates the lock status (open or closed lock icon) of the written data.
The • Total Markers Read box shows the total of all the iD-Markers that were read without any errors.
If this count matches the − Enter No. of Markers in Fixtures box value, then it is highlighted in green.
If the count does not match, then it is highlighted in red. −
Read and Write Button
When the Read and Write button is clicked, all the iD-Markers are first read. If the iD-Markers are read without any errors,
then the Dynatel
™
1420EZ Writer proceeds to write to the iD-Markers with the selected template data.
The following dialog box appears indicating that the writing process is in progress;