Filter
Top Products
16 78-9000-0120-3-A
Read and Write Failures
ERROR: When the Read and Write button is clicked, and iD-Markers are read with any of the above errors, the following
error message may be displayed and the write process is stopped.
REMEDY: See appropriate remedy in Read Failures section above.
ERROR: If all the iD-Markers are read and written, but an iD-Marker failed in verification, is displayed in the
Verify column for that iD-Marker. Clicking on the magnifying glass icon, displays the following error message dialog box.
REMEDY: Rewrite iD-Marker. If it fails again, remove it from the Dynatel
™
1420EZ Stand and replace with a
different iD-Marker.
ERROR: If the value of Number of Markers in the Fixture box is not the same as the value of Markers Read box, then the
following dialog box is displayed.
REMEDY: Identify the iD-Marker with the error, indicated by the , repeat the Read and Write operation. If it
fails again, remove it from the Dynatel
™
1420EZ Stand and replace with a different iD-Marker and repeat operation.