Filter
Top Products
0.21" (5.5 mm)
0.39" (10 mm)
Cut Line
Front Edge of Base
Drill 3 Mounting Holes
Rear Edge of
Base Not Shown
M150 Base Plate Mounting Template
(Drawn actual size)
3M Touch Systems Proprietary Information
Place this template on mounting surface and drill three holes as shown for mounting screws.
The screw heads must be smaller than 0.39" (10 mm) and larger than 0.21" (5.5 mm).
Adjust height of screw heads to securely lock monitor in place. This height is about 0.23" (6 mm).
3M Touch Systems Proprietary Information