Filter
Top Products
11
Setting Up (continued)
Setting Up (continued)
remote control
video inR-audio in-L
S-video in
BNC
rgb
audio in1
audio in2
rgb out
audio out
R/C
R/PR G/Y B/CB/PB HV
Y
control network
CR/PR
Ca/Pa
L
remote control
video inR-audio in-L
S-video in
BNC
rgb
audio in1
audio in2
rgb out
audio out
R/C
R/PR G/Y B/CB/PB HV
Y
control network
CR/PR
Ca/Pa
M
Monitor Projector
RGB in RGB cable rgb out
Connecting to a monitor
Speaker Projector
Connecting to a speaker (with amplifier)
Audio in Stereo Mini cable audio out
M
L
WARNING •
Use extra caution when connecting the power cord as incorrect or faulty
connections may result in fire and/or electrical shock. Please adhere to the “Product Safety
Guide” and the following.
•
Only plug the power cord into outlets rated for use with the power cord’s specified voltage range.
•
Only use the power cord that came with the projector. If it is damaged, contact your dealer to
newly get correct one.
•
Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.
•
Make sure that you firmly connect the power cord to the projector and wall outlet.
1
Connect the connector of the power cord to
the AC inlet of the projector.
2
Firmly plug the power cord’s plug into the
outlet.
AC Inlet
Connector Plug
Outlet
Connecting The Power Supply