3M X70 Projector User Manual


 
34
Multifunctional Settings (continued)
Multifunctional Settings (continued)
Item Description
SERVICE
Pressing the (or the ENTER) button calls the SERVICE
menu.
SERVICE Menu
Select an item using the / buttons, and press the (or
the ENTER) button to per form each function. :
FANSPEED AUTO ADJUST LENS TYPE LENS LOCK
FANSPEED
Select the fan speed level using the / buttons. :
HIGH NORMAL
The HIGH ups rotation speeds of fans, though. Please use this
function in using a projector at highlands etc.
memo Note that the projector is noisier when the HIGH is
selected.
AUTO
ADJUST
Select the ENABLE or the DISABLE using the /
buttons. :
ENABLE DISABLE
When you want to keep the current adjustment state, select
the DISABLE. When the ENABLE is selected, detecting a
signal change to a RGB signal performs the automatic
adjustment of the vertical position (V POSITION), the horizontal
position (H POSITION), the clock phase (H PHASE) and the
horizontal size (H SIZE).
LENS TYPE
Select the lens type currently used using the / buttons. :
AUTO 1 2 3 4 5
Please select depending on the following.
AUTO: automatically selects optimum mode.
1: for a standard lens (Type NL-500 etc.)
2: for a fixed short throw lens (Type FL-501 etc.)
3: for a short throw lens (Type SL-502 etc.)
4: for a long throw lens (Type LL-503 etc.)
5: for a super long throw lens (Type LL-504 etc.)
memo This setting has an influence on the keystone distortion
etc.
memo About the optional lens, ask your dealer.
LENS LOCK
Select the TURN ON or the TURN OFF using the
/
buttons. :
TURN ON TURN OFF
Selecting the TURN ON locks the adjustment of the lens shift
(X80 only), the zoom and the focus.
RESET
Select the EXECUTE using the button to reset the OPTION menu items. :
EXECUTE CANCEL
The items of the OPTION menu are collectively returned to the initial setting.
Note that the items VOLUME, LAMP TIME , FILTER TIME and SERVICE
are not reset.
: SELECT
SERVICE
FANSPEED
AUTO ADJUST
LENS TYPE
LENS LOCK
NORMAL
ENABLE
AUTO
TURN OFF
OPTION Menu (continued)