Filter
Top Products
Procedures
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 13
Aastra CNX Installation and Setup Procedures
13 Enter “y” if the timezone is correct, and press <Enter>.
Enter “n” if the timezone is incorrect, and press <Enter>.
Note: If you entered “n” at the verification prompt, repeat step 12 to correct the timezone, and then
enter “y” at step 13.
The following message and prompts display (after entering “y” at the verification prompt):
Please enter the date and time:
Four-digit year [2005]:
Month [03]:
Day [09]:
Hour [19]:
Minutes [40]:
14 The defaults for the date and time are the current date and time on your PC.
If these defaults are correct, press <Enter> at each prompt without making an entry.
If a default is incorrect, enter the correct value and press <Enter> to continue. In the following
example, 14 is entered for the hour since the default of 19 is incorrect.
Four-digit year [2005]:
Month [03]:
Day [09]:
Hour [19]: 14
Minutes [40]:
The following displays:
Before the following information is configured, please verify the
information below is correct before proceeding.
Date: 2005-03-09 14:40:00
Is this the correct time (y/n) [n]:
(continued)
Step Action