Filter
Top Products
Regulatory information
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 vii
If you experience trouble with this equipment, please contact Aastra Telecom for repair and warranty information. If
there is a problem with the network, the telephone company may request that you remove the equipment from the
network until the problem is resolved.
Aastra Telecom recommends that you install an AC surge protector in the AC outlet to which the equipment is
connected. This helps to prevent damage to the equipment caused by local lightning strikes or other electrical surges.
THE AASTRA CNX HAS NO USER SERVICEBLE PARTS.
FCC and telephone company procedures and requirements
In order to connect this equipment to the network, you must provide the local telephone company with the registration
number of this equipment, and you must order the proper connections.
To order the proper service, provide the telephone company with the following information:
• Number of required jacks and their USOC numbers
• Sequence in which the trunks are to be connected
• Facility interface codes, by position
CSA certification - U.S. and Canada
This equipment has been certified by CSA for use in the U.S. and Canada to the requirements of UL 1950. Third
Edition - Safety of Information Technology Equipment. Including Electrical Business equipment and Canadian
Standards Association CAN/CSA C22.2 No. 950-95 Third Edition.
Canadian requirements
Canadian Department of Communications Radio Interference Regulations
This digital apparatus (Aastra CNX) does not exceed the Class A limits for radio-noise emissions from digital
apparatus, as documented in the Radio Interference Regulations of the Canadian Department of Communications.
Règlement sur le brouillage radioélectrique du ministère des Communications
Cet appareil numérique (Aastra CNX) respecte les limites de bruits radioélectriques visant les appareils numériques
de classe A prescrites dans le Règlement sur le brouillage radioélectrique du ministère des Communications du
Canada.
Canada CS-03 rules and regulations
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment
Technical Specifications. This is confirmed by the registration number. The abbreviation, IC,
before the registration number signifies that registration was performed based on a
Declaration of Conformity indicating that Industry Canada technical specifications were met.
It does not imply that Industry Canada approved the equipment.”
NOTE: The Canadian Department of Communications label identifies certified equipment. The certification means
that the equipment meets certain telecommunications network protective, operational, and safety requirements. The
Department does not guarantee the equipment will operate to the user’s satisfaction.
Before installing this equipment, ensure that it is permissible to connect to the facilities of the local
telecommunications company. You must install this equipment using an acceptable connection method.