AIM-16 Manual
Page 1-2
Manual MAIM-16.D1d
Specifications
Analog Inputs and Outputs
• Input Channels: 16 Differential Analog Input Channels per AIM-16.
• Output Channels: Analog Output assignable to 1 of 8 Output Channels.
• Common Mode Rejection: 125 db for gains above 100.
90 db for gain = 1.
• Output Rating: 5mA at ±10VDC or ±5VDC.
• Gain Nonlinearity: ±0.005%.
• Temp. Coefficient: 5 ppm/ °C.
• Overvoltage: Continuous: 70V peak-to-peak, 35VDC.
• Sensors: Thermocouples, with break detect provided.
• RTDs, with excitation and offset provided.
• Strain gages, with ratiometric outputs.
• Voltage and current inputs.
• Reference Junction: Temperature Scale Factor: +24.4mV/ °C., 0.0VDC @ 0 °C.
Reference junction temperature output assignable as an input to
Analog Input Channel #0, or to any Output Channel.
• Preamplifier: 12 Analog Gains ranging from 0.5 to 1000.
• Programmable gains selected by computer, channel by channel.
• Manual gains selected by DIP switch one gain setting for all channels.
• Three TTL digital inputs for gain selection.
• Control Inputs: Four TTL digital inputs for channel selection.
• Terminations: Analog inputs: Plug-on screw terminal blocks for 12-22 AWG wire.
• Digital Input/Analog Output: 37-pin Sub-D connector.
Environmental
• Operating Temp: 0 °C. to 65 °C.
• Storage Temp: -40 °C. to + 100 °C.
• Humidity: 0 to 90% RH non-condensing.
• Size: 8.0 inches long, 4.75 inches wide, 0.75 inches high.
• Power Required: +5VDC: 20mA typical, with option P, DC to DC converter,
+5VDC: 125mA max..
+12VDC: 10mA typical.
-12VDC: 10mA typical.