Filter
Top Products
3-28 Machine Maintenance Procedures
3. Remove HDD module from mainboard connector (C). Refer to Figure 3-23.
4. Remove HDD module from upper cover.
5. Remove four (4) screws (D) from HDD bracket (E) (Figure 3-24).
Figure 3-24. HDD Module
6. Remove HDD bracket (B) from HDD module.
HDD Module Installation 0
1. Put HDD brackets onto HDD module (Figure 3-24).
2. Install four (4) screws (D) and secure HDD brackets (E) to HDD module (Figure 3-24).
3. Put HDD module onto upper cover. Refer to Figure 3-22.
4. Connect HDD module to mainboard connector (C). Refer to Figure 3-23.
5. Install one (1) screw (B) and secure HDD module to upper cover. Refer to Figure 3-23.
6. Install USB board.
ID
Size Quantity Screw Type
B M2.0*2.0 1
D M3.0*3.0 4
B
E
B
E
D
D
D
D