Filter
Top Products
Chapter 2 52
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/
Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However, if
you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4
Troubleshooting when problem arises.
To activate the BIOS Utility, press
m during POST (when “Press <F2> to enter Setup” message is prompted
on the bottom of screen).
Press m to enter setup. The default parameter of F12 Boot Menu is set to “disabled”. If you want to change
boot device without entering BIOS Setup Utility, please set the parameter to “enabled”.
Press <F12> during POST to enter multi-boot menu. In this menu, user can change boot device without
entering BIOS SETUP Utility.
PhoenixBIOS Setup Utility
CPU Type :
AMD Turion(tm) 64 X2 Mobile Technology TL-60
CPU Speed :
System BIOS Version : V0.07
VGA BIOS Version :
V60.84.07.00.02
Serial Number :
Asset Tag Number :
Product Name :
Manufacturer Name :
UUID :
XXXXXXXXXXXXXXXXXXXXXXXXXXXX
F1 Help Select Item F5/F6 Change Values F9 Setup Defaults
Esc
Exit
Select Menu Enter Select Sub-Menu F10 Save and Exit
HDD Model Name :
ST9160821AS-(PM)
HDD
Serial Number :
5MAOTKSQ
2000 MHz
Information
Main Advanced Boot Power ExitSecurity
Memory
ATAPI Model Name :
OptiarcDVDRWAD-75-(SM)
HDD Model Name :
None
HDD
Serial Number :
ATAPI Serial Number :
XXXXXXXXXXXXXXXXX
System Utilities
Chapter 2