Filter
Top Products
Chapter 3 65
7. Move the antenna away from the WLAN board and remove the two screws (F) on the WLAN board to
release the WLAN board.
8. Detach the WLAN board from the WLAN socket.
NOTE: When attaching the antenna back to the WLAN board, make sure the cable are arranged properly.
Removing the Hard Disk Drive Module
1. See “Removing the Battery Pack” on page 60.
2. See “Removing the SD dummy card” on page 60.
3. See “Removing the PC and ExpressCard dummy cards” on page 61.
4. See “Removing the Lower Cover” on page 62.
5. Remove the foam padding as shown.
Step Size (Quantity) Color Torque
1~2 M2 x L3 (2) Silver 1.6 kgf-cm
SG_Columbia.book Page 65 Thursday, April 19, 2007 10:49 AM