Filter
Top Products
Chapter 2 25
Main
The Main screen allows the user to set the system time and date as well as enable and disable boot option
and recovery.
NOTE: The screen above is for your reference only. Actual values may differ.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter Description Format/Option
System Time Sets the system time. The hours are displayed with 24-
hour format.
Format: HH:MM:SS
(hour:minute:second)
System Date Sets the system date. Format MM/DD/YYYY
(month/day/year)
System Memory This field reports the memory size of the system.
Memory size is fixed to 2047 MB.
N/A
Video Memory This field reports the memory allocated for video
graphics. Memory size is fixed to 64 MB.
N/A
Quick Boot Allows startup to skip certain tests while booting,
decreasing the time needed to boot the system.
Option: Enabled or
Disabled
Network Boot Enables, disables the system boot from LAN (remote
server).
Option: Enabled or
Disabled
F12 Boot Menu Enable the Press <F12> to display Boot Menu message
during boot.
Option: Enabled or
Disabled
D2D Recovery Enables, disables D2D Recovery function. The function
allows the user to create a hidden partition on hard disc
drive to store operation system and restore the system
to factory defaults.
Option: Enabled or
Disabled
SATA Mode Control the mode in which the SATA controller should
operate.
Option: AHCI or IDE
Display Mode Configures the mode of operation for the display Option: iGPU or ?
Item Specific Help
This is the help for the
hour field. Valid range
is from 0 to 23.
INCREASE/REDUCE
: F5/F6
F1
ESC
Help
Exit
Select Item
Select Menu
Change Values
Select SubMenu
Enter
F9
F10
Setup Default
Save and Exit
[19:10:59]
[01/09/2009]
4095 MB
512 MB
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[AHCI]
[iGPU]
[19:10:59]
[01/09/2009]
4095 MB
512 MB
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[AHCI]
[iGPU]
System Time:
System Date:
Total Memory:
Video Memory:
Quick Boot
Network Boot
F12 Boot Menu
D2D Recovery
SATA Mode
Display Mode
System Time:
System Date:
Total Memory:
Video Memory:
Quick Boot
Network Boot
F12 Boot Menu
D2D Recovery
SATA Mode
Display Mode
F5/F6
InsydeH20 Setup Utility Rev. 3.5
Boot
Exit
SecurityInformation
Advanced PowerMain