Filter
Top Products
64 Chapter 3
Removing the Wireless Card
NOTE: Fine tweezers are required for this procedure.
1. Locate the three antenna wires (white tape, red tape and no tape) on the left-hand side of the memory
bay.
2. Using fine tweezers, grip the white taped wire and pull upward until it is released from the board.
3. Repeat for the red taped and no tape wires.
4. Remove cables to access Wireless Card.
5. Locate and remove the three screws as shown.
NOTE: The Wireless Card lifts up automatically once the screws are removed.
6. Grip card and pull away from socket as shown.