Filter
Top Products
Chapter 3 67
3. Disconnect the antenna cables from the 3G board.
NOTE: There are 2 antenna cables connected to the 3G board. The Green antenna cable is connected to
MAIN connector and the Blue antenna cable is connected to AUX connector.
4. Remove the one screw (B) on the WLAN board to release the WLAN board.
5. Detach the 3G board from the connector.
NOTE: When attaching the antenna back to the 3G board, make sure the cable are arranged properly.
Step Size (Quantity) Color Torque
1 M2 x L4 (2) Silver 1.6 kgf-cm