Filter
Top Products
68 Chapter 3
Removing the WLAN Board Module
1. See “Removing the Battery Pack” on page 56.
2. See “Removing the Expansion Slots Cover” on page 65.
3. Disconnect the antenna cables from the WLAN board.
NOTE: There are 3 antenna cables connected to the WLAN board. The Black antenna cable is connected to
connector 1, the White antenna cable is connected to connector 2 and the Grey antenna cable is
connected to connector 3.
4. Remove the one screw (B) on the WLAN board to release the WLAN board.
Step Size (Quantity) Color Torque
1 M2 x L4 (1) Silver 1.6 kgf-cm