Filter
Top Products
31
• Other passwords include Windows and screensaver passwords.
Entering passwords
When a password is set, a password prompt appears in the left-hand
corner of the display screen.
• When the Setup Password is set, the following prompt appears
when you press F2 to enter the BIOS Utility at boot-up.
Type the Setup Password and press Enter to access the BIOS Utility.
• When the Power-on Password is set, the following prompt appears
at boot-up.
Type the Power-on Password (a . symbol appears for each
character you type) and press Enter to use the computer. If you
enter the password incorrectly, an x symbol appears. Try again
and press Enter.
• When the Hard Disk Password is set, the following prompt appears
at boot-up.
Type the Hard Disk Password (a . symbol appears for each
character you type) and press Enter to use the computer. If you
enter the password incorrectly, an x symbol appears. Try again
and press Enter.
Important! You have three chances to enter a password. If you
successfully entered the password, you are presented with a
correct entry symbol.
If you fail to enter the password correctly after three tries, the
740-e.book Page 31 Monday, July 23, 2001 3:40 PM