Filter
Top Products
3 Troubleshooting my computer
50
Error messages
If you receive an error message, note the message and take the
corrective action. The following table lists the error messages in
alphabetical order together with the recommended course of action.
Error Messages Corrective Action
CMOS Battery Bad Contact your dealer or an authorized service
center.
CMOS Checksum Error Contact your dealer or an authorized service
center.
Floppy Disk Controller
Error
Contact your dealer or an authorized service
center.
Equipment
Configuration Error
Press F2 (during POST) to enter the BIOS Utility;
then press Esc to exit and reconfigure the
computer.
Fixed Disk 0 Error Contact your dealer or an authorized service
center.
I/O Parity Error Contact your dealer or an authorized service
center.
Insert system diskette
and press <Enter> key
to reboot
Insert a system (bootable) diskette into the floppy
drive (A:), then press Enter to reboot.
PS/2 Keyboard Error or
Not Connected
Contact your dealer or an authorized service
center.
PS/2 Keyboard Interface
Error
Contact your dealer or an authorized service
center.
Memory Size Mismatch Press F2 (during POST) to enter the BIOS Utility;
then press Esc to exit and reconfigure the
computer.
PS/2 Pointing Device
Error
Contact your dealer or an authorized service
center.
PS/2 Pointing Device
Interface Error
Contact your dealer or an authorized service
center.
740-e.book Page 50 Monday, July 23, 2001 3:40 PM