Filter
Top Products
Chapter 1 System Housing 1-11
2. Insert an PCI, ISA, or AGP card into the slot. Make sure that the
card is properly seated.
3. Secure the PCI card to the housing with the screw. When you turn
on the system, BIOS automatically detects and assigns resources
to these expansion cards.
Both PnP and non-PnP ISA cards require
specific IRQs. When installing ISA cards,
make sure that the IRQs required by these
cards are not previously assigned to PCI
devices to avoid resource conflicts.
When installing an AGP card, make sure that
the IRQ required by this card is not already
assigned to a PCI or ISA device to avoid
resource conflicts.