Filter
Top Products
73
Once the installation is complete, the following window appears.
Click the Finish button to end the installation and exit the setup utility.
RAID Migration Instructions
The Intel Application Accelerator RAID Edition offers the flexibility to
upgrade from a single Serial ATA (SATA) hard drive to a two drive
RAID-0 configuration when an additional SATA hard drive is added to
the system. This process will create a new RAID volume from an
existing disk. However, several important steps must be followed at the
time the system is first configured in order to take advantage of RAID
when upgrading to a second SATA hard drive.
• BIOS must be configured for RAID before installing Windows XP /
2000 on the single SATA hard drive.
• Install the Intel Application Accelerator RAID driver during
Windows Setup.
• Install the Intel Application Accelerator RAID Edition after the
operating system is installed.
Note: A Create from Existing Disk operation will delete all
existing data from the added disk and the data cannot be
recovered. It is critical to backup all important data on the added
BB!H421!.!FO/cppl!!Qbhf!84!!Gsjebz-!Nbz!8-!3115!!2;42!QN